Hemp Decortication Explained: Bast, Hurd, Technologies and Throughput

November 18, 2026 · Processing

Decortication is the step that turns a field of baled hemp stalks into things buyers actually pay for: bast fiber, hurd (also called shiv) and a stream of dust and fines. This guide is for fiber growers deciding whether to plant, and for founders weighing a processing business. It explains how decortication works, what the farm side controls, what published studies say about throughput and cost, and where each output is sold.

This article contains affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases, at no cost to you.

Key takeaways
  • A hemp stalk is mostly hurd. University of Missouri Extension puts hurd at about 75% of stalk volume and bast at about 25%; trials show the bast share ranging from roughly 20% to nearly 40% depending on variety and harvest date.
  • Retting and dry storage happen on the farm. Extension guidance from Rutgers and the University of Vermont says stalks should dry to about 15% moisture before baling, at which point retting stops.
  • U.S. fiber hemp is still a low-value, high-volume crop. USDA NASS valued 2025 fiber production at $13.5 million on 21,693 harvested acres, with an average price of $0.21 per pound.
  • Throughput and utilization drive processing economics. Published cost studies show capital per ton falling sharply as line capacity rises, and a small farm-scale decorticator running only 3.6 to 4.8 months a year.

What decortication does

Decortication is the mechanical separation of the hemp stem into its main parts. The outer bark carries long, strong bast fibers. The woody core breaks into short, absorbent pieces called hurd. Everything else, such as dust, fines and leftover leaf, has to be removed, collected and either sold or disposed of.

The University of Missouri Extension describes the step simply: bales arrive at a processor, go through a quality check, and are fed into a decortication line. Depending on the buyer, the fiber may then need further refining, such as softening, combing or spinning. Missouri’s value-chain study also points out that processors usually sell intermediate industrial products under contract, with little branding. That makes decortication a business-to-business commodity operation, closer to a cotton gin or a hay operation than to a consumer brand.

For a grower, decortication matters because it sets the price and the specifications. Before you plant fiber hemp, you need a processor close enough to take your bales. Missouri Extension notes that transport costs for bulky material are high and become a barrier to profitability anywhere without a nearby decorticator.

Inside the stalk: bast vs hurd

The split between bast and hurd decides how much of each product a ton of stalk yields, so it is the first number in any processing model. Published figures vary:

Source Bast share Hurd share Notes
University of Missouri Extension (2019) About 25% of volume About 75% of volume Its margin model assumes 20% bast, 75% hurd and 5% shrink by mass
Oregon State University Extension, EM 9434 (2024) 24.1% average across varieties Not stated Varietal trial
University of Vermont Extension harvest-date trial (2024) 38.6% at day 74, 22.5% at day 81, 25.6% at day 95 Remainder One variety (Futura 83), showing how much harvest timing matters
Ohio State University CFAES (2025) Fiber yield assumed at 20% to 30% of stalk Not stated Techno-economic model assumption

The practical point: hurd is the bigger product by weight, so a processor that cannot sell hurd is throwing away most of its throughput. Fiber gets the attention, but hurd sales often decide whether a plant pays.

Retting, drying and baling

Retting is the partial breakdown of the pectins that glue bast to the woody core. USDA NASS defines it as a process that uses moisture and microbes to break those bonds, making it easier to separate bast from hurd. Well-retted stalks decorticate more cleanly and need less energy.

Field (dew) retting vs water retting

Most U.S. fiber hemp is field retted: cut stalks lie in the swath while dew, rain and soil microbes do the work. A peer-reviewed study by Musio, Müssig and Amaducci in Frontiers in Plant Science (2018) notes that dew retting is widespread in Europe because it costs little. Water retting, by contrast, has a high environmental impact because it uses so much water. Rutgers Cooperative Extension adds that water retting may produce better fiber but is labor-intensive and costly.

The University of Vermont Extension field-retting guide reports that retting in the Northeast generally takes 16 to 28 days. It also says piles should be turned roughly every six days, and more often after rain, so stalks ret evenly.

Moisture before baling

Both Rutgers and UVM give the same target: dry stalks to about 15% moisture before baling. Rutgers adds that stalks should keep drying to about 10% in the bale, and UVM notes that retting stops once stalks reach that level, so the crop can be baled and stored. Baling wet invites mold, uneven quality and, as with hay, a risk of heating in storage. A hay-style bale moisture probe is a cheap way to check before you bale.

Bale moisture tester

A probe-style hay moisture meter lets you spot-check stalk moisture in the windrow and in bales; check that its range covers the low teens and calibrate it against oven-dried samples.

Check price on Amazon

As an Amazon Associate, HempDollars earns from qualifying purchases.

What processors look for

Missouri Extension says quality control starts on the farm: weed control, harvest timing, proper retting, and clean, dry storage. Processors inspect bales before they enter the line, and production contracts typically spell out delivery point, acceptable form, final pricing and deductions. Read those clauses before you plant. Our guide to fiber hemp yields, prices and contracts covers the grower side in more detail.

Decortication technologies

There are two broad processing routes, and they serve different markets.

Route How it works Typical harvest Best suited to
Long-fiber (scutching and hackling) Stems are kept parallel, then broken, scutched and combed, as with flax Earlier, around full flowering, to optimize long fiber bundles (Musio et al. 2018) Textile-grade long fiber; small or specialty volumes
Whole-stalk or “total fiber” Baled stalks of any orientation are broken and separated mechanically into bast, hurd and fines Often later; many crops are now harvested at seed maturity for dual-purpose use (Musio et al. 2018) Nonwovens, composites, insulation, bedding, hempcrete hurd

Long-fiber processing is rare in the U.S. In 2025, the University of Vermont Extension announced a hackler it described as the third step of a three-part scutching line for long fibers like hemp and flax. UVM described it as cottage-industry scale and the first of its kind in the U.S.

Most U.S. capacity is whole-stalk processing, which accepts large round or square bales and produces shorter, technical fiber. That route fits the baling and harvest equipment U.S. farmers already own, but its fiber is generally not suited to traditional linen-style spinning without further processing.

When you evaluate a technology, ask the vendor or processor four questions: (1) what bale format and moisture the line accepts, (2) rated versus demonstrated tons per hour, (3) how clean the hurd and fiber come out (fiber-in-hurd and hurd-in-fiber percentages), and (4) how much dust is generated and where it goes. Insist on demonstrated numbers from a reference site, not brochure figures. Our supplier vetting guide covers how to check claims.

Throughput and cost benchmarks

Few public sources report decortication costs. Two of the most useful come from university extension.

Industrial-scale lines (European data)

The University of Missouri Extension reproduced capital cost estimates derived from Bouloc’s 2013 reference book on hemp, for European fiber extraction plants in 2005 dollars. Missouri cautions that European costs may not be directly comparable to the U.S., and the numbers are now two decades old, but the scale effect is clear:

Line throughput Annual volume Capital investment Capital per annual ton
1.7 tons/hour 5,500 tons $3.33 million About $600
5.5 tons/hour 17,794 tons $5.55 million About $312

The same source lists energy use of 100 to 150 kWh per ton. It also reports one worker for every 2,200 tons processed per year, plus maintenance staff, and an average operating cost of $152.40 per ton before feedstock.

Farm-scale decortication (U.S. model)

A 2025 Ohio State University CFAES fact sheet by Khanal and Shah summarizes their techno-economic analysis of a 162-hectare (about 400-acre) farm with its own small decorticator. The modeled unit processes 454 kg (about 1,000 lb) per hour on 7.5 kW of power. Processing equipment costs about $239,000. The equipment runs only 1,084 to 1,437 hours a year, the equivalent of 3.6 to 4.8 months. Facility-related costs make up 63% of processing cost, labor 36% and energy just 1%. The authors note the spare capacity could process more material, which is another way of saying that idle time is the biggest cost.

The lesson from both studies is the same: decortication is a fixed-cost business. Running more tons through the same line, for more months of the year, matters more than energy prices. For the full investment picture, see hemp processing plant economics.

Dust, fire and safety

Decortication makes dust, and fine plant dust can burn or explode. OSHA’s Combustible Dust National Emphasis Program (CPL 03-00-008, effective January 2023) lists wood dust and some textile dusts among covered materials. It notes that in 2018, wood and food products made up about 70% of the materials involved in combustible dust fires and explosions. The directive points employers to NFPA 652 for dust hazard analyses and references NFPA 664 (wood processing) and NFPA 61 (agricultural and food processing). OSHA does not single out hemp, but hurd and fiber dust behave like other fine cellulosic dusts, so plan as if the same rules apply.

  • Commission a dust hazard analysis before you finalize the layout.
  • Design dust collection, housekeeping schedules and spark detection into the line from the start.
  • Separate bale storage from the process building, and talk to your insurer and local fire official early.

Where the outputs sell

Missouri Extension found that most processed hemp fiber tonnage was going into relatively low-value channels such as animal bedding and insulation, and that U.S. fiber competes with imports, especially from China. The Missouri study also gave a fall 2019 price snapshot, sourced from a trade price service and private reporters. It is dated, but it shows the relative value of each output.

Product Fall 2019 price (Missouri Extension) Typical uses
Baled fiber biomass (farm gate) $140 to $272 per ton Feedstock to decorticators
Bast fiber $2,190 per ton Nonwovens, composites, insulation, textiles, paper
Hurd $709 per ton (Chinese) to $800 per ton (American) Animal bedding, hempcrete, absorbents, particle board

More recent farm-gate data comes from USDA. NASS reports that 2025 fiber hemp sold for an average of $0.21 per pound, about $420 per ton. Among states NASS published, prices ranged from $0.06 per pound in Oklahoma to $0.50 in Texas. USDA ERS calculated an average of $0.24 per pound for fiber hemp from 2023 to 2025, compared with $24.50 for floral hemp. ERS also reports that Kansas, Nebraska, Oklahoma and Texas together produced 56% of U.S. hemp fiber in 2025.

Hurd for construction is a growing outlet. See our hempcrete guide for what builders require, and hemp building materials beyond hempcrete for panels and insulation.

Frequently asked questions

What is the difference between decortication and retting?

Retting is a biological process, done mostly in the field, that loosens the bond between bast and hurd. Decortication is the mechanical step, done at a processing plant, that physically separates them. Good retting makes decortication faster and cleaner.

How much of a hemp stalk becomes fiber?

Extension sources put bast fiber at roughly 20% to 30% of the stalk in most cases, with some trials near 39% depending on variety and harvest date. The rest is mostly hurd, plus a few percent lost as dust and shrink.

What moisture should hemp stalks be before baling?

Rutgers and University of Vermont Extension both give about 15%. Below that, retting stops and the bales can be stored.

Can I buy a small decorticator for my farm?

Farm-scale units exist, and Ohio State modeled one at about 1,000 lb per hour with roughly $239,000 in processing equipment. The same study found it would sit idle most of the year on a 400-acre farm. Sharing a unit, custom processing, or a cooperative usually spreads that fixed cost better.

Is fiber hemp still regulated like other hemp?

Yes. Fiber growers still need a hemp license and must follow their state or USDA plan’s sampling and reporting rules. See how hemp licensing works. Rules change; confirm with your state department of agriculture and USDA AMS before acting.

Sources

  1. USDA NASS, National Hemp Report (April 16, 2026)
  2. USDA ERS, Special Article: U.S. Hemp Fiber Market Outlook, Dew, Yeh and Meyer (2026)
  3. University of Missouri Extension, Value Chains for the Missouri Industrial Hemp Industry (2019)
  4. Oregon State University Extension, EM 9434: Comparison of Stem Fiber Yield in an Industrial Hemp Varietal Trial (2024)
  5. University of Vermont Extension, 2023 Hemp Fiber Harvest Date Trial (2024)
  6. University of Vermont Extension, Field Retting Photo Guide (2025)
  7. University of Vermont Extension, New Hemp Fiber Hackler Has Arrived (2025)
  8. Rutgers Cooperative Extension, FS1343: Hemp Production for Fiber, Komar and Bamka (2022)
  9. Musio, Müssig and Amaducci, Optimizing Hemp Fiber Production for High Performance Composite Applications, Frontiers in Plant Science (2018)
  10. Ohio State University CFAES, Khanal and Shah, Techno-economic Analysis of Hemp Production, Logistics and Processing (2025)
  11. OSHA, CPL 03-00-008: Combustible Dust National Emphasis Program (2023)

Figures last checked: November 18, 2026.

🌱 Finished reading? You earned 5 seeds.

Every article you read to the end earns seeds in Hemp Empire, our free hemp farming tycoon game. Play now →

Some links may be affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases.