Hempcrete for Builders: The IRC Appendix, Performance and Cost Drivers

November 18, 2026 · Processing

Hempcrete, or hemp-lime, is a mix of hemp hurd, a lime-based binder and water that is cast or sprayed around a wood frame to form an insulating wall. Since the 2024 International Residential Code added a hemp-lime appendix, it has had a recognized code path in U.S. homebuilding. This guide is for builders, designers and the hemp processors who want to supply them. It covers what the appendix allows, how the material performs according to the code tables and peer-reviewed research, and what drives cost.

This article contains affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases, at no cost to you.

Key takeaways
  • The 2024 IRC includes Appendix BL, “Hemp-Lime (Hempcrete) Construction,” covering hemp-lime as a nonstructural wall infill. Like any IRC appendix, it applies only where a state or local jurisdiction adopts it.
  • The appendix’s thermal table gives R-values from about R-2.1 per inch at 12.5 lb/ft³ down to R-1.2 per inch at 25 lb/ft³. Lighter mixes insulate better.
  • Hemp-lime walls carry no fire-resistance rating by default; a rating requires ASTM E119 or UL 263 testing of the assembly.
  • Peer-reviewed work finds hempcrete can store more carbon than it emits, but results depend on the mix. Dense mixes with portland cement can end up net-positive.
  • We found no credible public U.S. cost data. Cost depends on hurd supply, binder, labor method and drying time.

What hempcrete is

Hempcrete is not concrete. It does not carry structural loads and it has no aggregate in the conventional sense. The “aggregate” is hemp hurd, the woody core of the stalk that is left after the bast fiber is removed. The University of Missouri Extension estimates hurd at about 75% of stalk volume, which is why hempcrete is one of the most promising outlets for decortication by-products. The binder is usually lime-based. The cured material is light, vapor-open and insulating, and it is placed around a load-bearing frame.

For builders, the practical consequence is that hempcrete replaces the insulation, sheathing and some of the finish layers in a wall, but not the framing. For processors, it means hurd quality (particle size, dust and fiber content) becomes a product specification rather than a waste stream.

The IRC hemp-lime appendix

According to HempBuild Magazine, the hemp-lime appendix won final approval for the 2024 International Residential Code in 2022, when the International Code Council closed public comment at a hearing in Louisville, Kentucky. The application was filed by the U.S. Hemp Building Association’s foundation. The appendix was numbered BA during development and appears as Appendix BL in the published 2024 IRC. The Hemp Building Institute also confirms it was accepted into the 2024 IRC.

Two points matter for anyone planning a project:

  • Adoption is local. IRC appendices are voluntary unless a state or local jurisdiction specifically adopts them. Where it has not been adopted, a builder may still seek approval from the building official under the alternative materials and methods provisions.
  • It is an infill system. The appendix governs hemp-lime as a nonstructural building material and wall infill, used within a light-frame structure.

California, for example, includes Appendix BL in its 2025 California Residential Code (Title 24, Part 2.5), effective January 1, 2026. The details below are taken from that published version. California prints its own amendments in italics and may differ from the model code in places, so check the ICC text and your local amendments before you design.

Key prescriptive requirements

The table summarizes the main limits in Appendix BL as published in the 2025 California Residential Code.

Topic Requirement (Appendix BL)
Scope Hemp-lime as a nonstructural building material and wall infill system
Seismic One- and two-family dwellings in Seismic Design Categories D0, D1 and D2, and townhouses in C, D0, D1 and D2, need an approved engineered design by a registered design professional
Building size (BL103.3.1) Not more than one story above grade plane; building height not more than 25 feet
Wall weight Average unit wall weight not more than 65 psf
Infill thickness At least 3 inches between the face of framing and the finish
Density 12.5 to 25 lb/ft³
Mix Water-to-binder ratio between 1:1 and 2:1 by weight (or the binder maker’s recommendation)
Binders Hydraulic lime, hydrated lime, pozzolans and natural cements, alone or combined, among others matching approved test samples
Hurd Substantially free from dust and fiber clumps, matching approved test samples
Bracing Wall bracing Method LIB; walls with hemp-lime infill may not be braced with solid sheathing
Moisture Vapor retarders prohibited on hemp-lime walls, except where the appendix permits or requires them
Strength Mix must show at least 29 psi (0.2 MPa) compressive strength after at least 14 days of curing indoors

The one-story limit and the bracing method shape the market. Under the prescriptive path, single-story homes, additions and accessory buildings in lower seismic areas are the easy fit. Larger projects need engineering.

Thermal performance

Appendix BL classifies hemp-lime infill walls as mass walls for energy code purposes and gives a table of R-values by density. Linear interpolation is allowed between listed densities, but extrapolation is not. A builder can instead use lab results under ASTM C177, C518, C1114 or C1363, and results for a given mix can be reused across projects.

Density (lb/ft³) R-value per inch (Table BL106.2) Illustrative: 12-inch wall
12.5 R-2.10 About R-25
15 R-1.86 About R-22
20 R-1.54 About R-18
25 R-1.20 About R-14

The right-hand column is our illustrative multiplication for the hempcrete layer alone, not a whole-wall rating. Peer-reviewed data is consistent with the code table. A 2020 study in Materials by Abdellatef and colleagues summarizes published thermal conductivity of 0.06 to 0.11 W/m·K at dry densities of 200 to 400 kg/m³. That works out to roughly R-1.3 to R-2.4 per inch. Their own mixes measured 0.087 to 0.096 W/m·K.

The trade-off is clear: lighter mixes insulate better but are weaker. Specify density, not just “hempcrete.”

Strength, fire and moisture

Strength

Abdellatef et al. report typical compressive strength for hempcrete of 0.2 to 1.15 MPa, and their own mixes averaged 0.28 MPa. The code minimum of 0.2 MPa (29 psi) sits at the low end of that range, which reflects the infill role: the frame carries the loads.

Fire

Appendix BL states plainly that hemp-lime walls do not have a fire-resistance rating. Any rating must come from testing the assembly to ASTM E119 or UL 263. Surfaces next to fireplaces or chimneys need at least 3/8 inch of plaster, and clearances still apply. Some suppliers publish surface-burning (ASTM E84) or assembly test results. Ask for the full lab report and check that it matches the exact hurd, binder and density you are buying. A 2025 study in Materials by Janowska-Renkas and colleagues found that additives changed burn depth in a flame test: unmodified hemp concrete burned to 95 mm, while mixes with metakaolin or fly ash burned to 45 to 50 mm.

Moisture and drying

Hempcrete is designed to be vapor-open, which is why the appendix prohibits vapor retarders on hemp-lime walls in most cases. Mixes are placed wet, and Abdellatef et al. warn that high water content can cause excessively long drying times. We did not find a peer-reviewed field drying-time figure to cite. Plan the schedule around the weather and the supplier’s guidance, and leave time before applying finishes.

Carbon

Carbon storage is a major selling point. A 2020 paper in the Journal of Cleaner Production by Arehart, Nelson and Srubar modeled a 1 m² wall assembly with a U-value of 0.27 W/(m²·K). It estimated that in-place carbonation can re-absorb 18.5% to 38.4% of the emissions from making the binder. Counting carbon stored in the hemp, the best mixes reached a net of about −16 kg CO2e per square meter of wall. The authors caution that some formulations end up net-positive, especially high-density mixes above 300 kg/m³ that contain portland cement.

For marketing claims, the safe position is to cite the specific mix and study, not a generic “carbon-negative” label.

Cost drivers and supply chain

We could not find a credible, current U.S. cost per square foot from a university, government agency or peer-reviewed study, so we do not quote one. The Canadian study by Abdellatef et al. notes that production cost and embodied energy could be considerably higher in Canada than in Europe, which reflects how young the North American supply chain is. These are the factors that drive a bid:

Cost driver Why it matters
Hurd supply and freight Hurd is bulky; distance from a decorticator adds cost. Missouri Extension listed fall 2019 hurd prices of $709 per ton (Chinese) and $800 per ton (American).
Hurd grade The code requires hurd substantially free of dust and fiber clumps, so building-grade hurd needs cleaning and sizing.
Binder Lime binders are often imported or specialty products; cement-heavy mixes hurt the carbon case.
Placement method Hand-tamped forms, spray application and precast blocks have different labor and equipment needs.
Drying time Longer drying delays finishes and adds carrying cost.
Engineering and approvals Higher seismic categories, multi-story designs and jurisdictions that have not adopted the appendix add design and review cost.
Crew experience Few crews have done many hempcrete walls; learning time shows up in labor hours.

For hemp processors, construction hurd can be a premium outlet compared with bedding, but only if the plant can meet a consistent specification. See hemp processing plant economics for how hurd prices drive margins, and hemp building materials beyond hempcrete for panels and insulation.

Books on building with hemp-lime

A practical book on hemp-lime construction helps crews understand mixing, forming and curing; check that it covers North American codes or pair it with the IRC appendix.

Check price on Amazon

As an Amazon Associate, HempDollars earns from qualifying purchases.

Frequently asked questions

Is hempcrete allowed by the building code?

The 2024 IRC includes Appendix BL for hemp-lime construction, but an appendix applies only where your state or local jurisdiction adopts it. Elsewhere, ask the building official about approval as an alternative material.

Can hempcrete be structural?

No. Appendix BL treats hemp-lime as nonstructural wall infill. The wood frame carries the loads, and the code sets a minimum compressive strength of only 29 psi for the infill.

What R-value does hempcrete have?

Appendix BL lists R-1.20 to R-2.10 per inch depending on density, with lighter mixes insulating better. A 12-inch wall at 15 lb/ft³ works out to about R-22 for the hempcrete layer.

Is hempcrete fireproof?

The code does not assign hemp-lime walls a fire-resistance rating. A rating requires ASTM E119 or UL 263 testing of the specific assembly. Ask suppliers for full test reports.

How much does a hempcrete wall cost?

We found no credible public U.S. cost benchmark. Get bids that itemize hurd, binder, labor, forming and drying time, and compare them with a conventional wall that meets the same R-value.

Sources

  1. HempBuild Magazine, Hempcrete approved for U.S. residential building code update (2022)
  2. Hemp Building Institute, IRC Commentary Fundraiser (undated)
  3. 2025 California Residential Code, Appendix BL, Section BL101 General (2025)
  4. 2025 California Residential Code, Appendix BL, Section BL103 Hemp-Lime Construction (2025)
  5. 2025 California Residential Code, Appendix BL, Section BL105 Fire Resistance (2025)
  6. 2025 California Residential Code, Appendix BL, Section BL106 Thermal Performance (2025)
  7. 2025 California Residential Code, Appendix BL, Section BL107 Mechanical Performance (2025)
  8. Abdellatef et al., Mechanical, Thermal, and Moisture Buffering Properties of Novel Insulating Hemp-Lime Composite Building Materials, Materials (2020)
  9. Arehart, Nelson and Srubar, On the theoretical carbon storage and carbon sequestration potential of hempcrete, Journal of Cleaner Production (2020)
  10. Janowska-Renkas et al., Hemp Concrete with Mineral Additives as a Durable and Fire-Resistant Material in Green Construction, Materials (2025)
  11. University of Missouri Extension, Value Chains for the Missouri Industrial Hemp Industry (2019)

Figures last checked: November 18, 2026.

🌱 Finished reading? You earned 5 seeds.

Every article you read to the end earns seeds in Hemp Empire, our free hemp farming tycoon game. Play now →

Some links may be affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases.