The Hemp Paper and Pulp Market: History, Niches and the Economics of a Mill

November 18, 2026 · Products & Markets

Sheet of hemp paper made with traditional papermaking methods in Japan
Photo: Hemp paper in Japan by タバコはマーダー, CC BY-SA 4.0, via Wikimedia Commons

Few hemp claims are repeated as often as the idea that hemp could replace trees for paper. For a grower deciding whether to sign a fiber contract, a processor looking for hurd buyers or an investor evaluating a pulp startup, the useful question is narrower: who buys hemp pulp today, at what price, and what would it take to supply them? This guide sorts the history from the current market and ends with the questions any hemp pulp project should answer before money changes hands.

Key takeaways

  • USDA’s famous 1916 hurd bulletin claimed roughly four acres of pulpwood land for every acre of hemp, yet the same report spelled out collection, storage and quality problems that still apply.
  • By a 1994 estimate, hemp supplied only about 0.05% of the world’s pulp, around 120,000 tons a year, almost all of it for specialty papers.
  • That 1994 article priced hemp pulp near $2,500 a ton when bleached wood pulp sold for about $400, and its typical mill was one-fiftieth the size of a wood pulp mill.
  • The entire 2025 U.S. fiber hemp crop was worth $13.5 million, from 21,693 harvested acres, says USDA NASS.
  • The business case rests on niches that pay for long, strong fiber. Head-to-head with wood on commodity grades, hemp loses.

Want the technical detail? See HempRefinery’s guide to the hemp paper and pulp market.

Two feedstocks, two businesses

A hemp stalk gives two very different papermaking materials, and pitches that say “hemp pulp” often blur them.

  • Bast fiber is the long, strong outer fiber. Historically it went into durable specialty papers. It is also the part of the stalk that textile, composite and insulation buyers want, so pulp mills compete for it.
  • Hurd is the woody inner core. Its fibers are much shorter, and it is bulky and light. It is cheaper and more plentiful, and processors already sell it into bedding and building markets.

The two fractions pulp differently and suit different paper grades. Before you evaluate any hemp pulp opportunity, find out which fraction it uses, at what cleanliness, and what the supplier could earn selling that same material elsewhere. Our guides to hemp decortication and how processors make money explain how the fractions are separated and priced.

What the 1916 USDA study actually said

Hemp paper advocates nearly always cite the same document: USDA Bulletin No. 404, written by botanist Lyster Dewey and chemist Jason Merrill and released in 1916 under the title “Hemp Hurds as Paper-Making Material.” The line people quote comes from a table comparing land use. On a sustained basis, the authors figured, a 10,000-acre hemp rotation could feed as much pulp as 40,500 acres of typical pulpwood forest. Their mill trials produced a sheet they judged equal to a No. 1 machine-finish printing grade under Government Printing Office rules.

The bulletin’s authors were also candid about what stood in the way, and those passages get quoted far less:

  • Collection: only mechanically broken hemp left hurds in one place. Breaking by hand left them strewn around farms in amounts too small to be worth gathering.
  • Storage: bales left exposed soaked up rain and grit, and once hurds were wet, sieving could no longer clean them.
  • Density: a cubic foot of hurds weighed about 5.4 pounds, compared with roughly 8.93 for poplar chips. Less weight per digester load was, in the authors’ words, among “the most serious objections.”
  • Quality: shive specks marred most of the test sheets badly enough that the bulletin doubted buyers would accept them, and most runs exceeded the ash limit.

Collection, storage, bulk density and cleanliness are still the core cost problems for hemp pulp more than a century later. An investor who hears only the 40,500-acre line is hearing half the report.

Where hemp pulp sells today

Primary-source numbers on today’s global hemp pulp trade are hard to come by. The best detailed public picture is still a short 1994 paper by Gertjan van Roekel of the Dutch research institute ATO-DLO, published by the International Hemp Association. Drawing on 1991 FAO figures, he estimated global output at around 120,000 tons a year, or about one-twentieth of one percent of all pulp.

Almost none of it went into ordinary paper. Van Roekel listed cigarette papers, lab and technical filters, tea bags and coffee filters, nonwovens, capacitor insulating papers, greaseproof wraps, security papers and art papers. Pure hemp sheets, he wrote, were not made in any meaningful volume; mills mixed hemp with wood pulp.

Thirty-year-old figures are not a market size, so do not put them in a pitch deck as one. What still holds is the shape of the market: a premium input for thin, strong, specialty grades, not a commodity substitute for printing paper or corrugated board. Be wary of any market report that quotes a large “hemp paper market” figure without explaining where it comes from.

Why wood still wins on price

Cost and scale

Van Roekel put hemp pulp at roughly $2,500 a ton when a standard bleached wood pulp cost around $400, a sixfold gap. Scale explained much of it: a typical hemp mill turned out about 5,000 tons a year, while he described wood pulp mills as starting at 250,000 tons. Today’s prices differ, but the size mismatch has not gone away. A wood mill’s whole cost structure assumes logging-truck logistics and enormous, continuous throughput.

Seasonal supply

A mill runs every day; a hemp field yields once a season. Someone has to carry eleven months of feedstock in storage. The 1994 article listed costly, labor-heavy storage of bulky stalk as a key driver of high hemp pulp prices, echoing the 1916 bulletin. Storage space, shrink and fire risk all become part of the feedstock price; see our guide to drying and storing hemp.

A small domestic base

Back in 2000, USDA’s Economic Research Service judged the U.S. demand for hemp fiber in paper, specialty textiles and composites to be “small, thin markets” and expected that to continue. A quarter century later the supply side is still modest. According to USDA NASS, farmers harvested 21,693 acres of fiber hemp in the open in 2025 and produced 67.3 million pounds worth $13.5 million, or $0.21 a pound on average.

As an illustrative comparison: 67.3 million pounds is about 33,650 short tons of fiber-hemp production nationally. Even before losses in processing and pulping, that is a fraction of the 250,000-ton annual scale the 1994 article described for a single wood pulp mill. A hemp pulp project would need either a specialty niche that runs at small scale, or its own dedicated acreage.

Where the opportunities are

  • Technical and thin papers. Filter media and lightweight specialty sheets already pay up for fiber length and strength, so hemp does not have to win on price.
  • Partial substitution. A mill might swap a slice of its wood furnish for hemp to gain tear strength or a story for the brand, without retooling.
  • Molded pulp and packaging. Trays and clamshells forgive short fibers and off-white color, which plays to hurd rather than bast.
  • Local trials. A decorticator with steady output and a paper or molded-fiber plant within trucking distance can test the idea cheaply on equipment that already exists.

For growers, the practical point is that paper is unlikely to be the anchor buyer for a fiber crop. It may become one outlet among several for a processor that already sells fiber and hurd into other markets. See hemp fiber farming economics and hemp in bioplastics and composites for the competing uses.

Due diligence for a pulp project

Whether you are supplying a mill or investing in one, get clear answers to these questions:

  1. Which fraction will be supplied, bast or hurd, and to what cleanliness specification?
  2. What end product is it for, and can you name companies that buy that product now?
  3. Has a mill trialed the material on existing equipment, and are the results documented?
  4. How will a full year’s supply from one harvest be stored, protected and delivered?
  5. What delivered price per ton must hemp reach to replace the current input, and what can the supplier earn selling the same material elsewhere?
  6. Have independent pulping engineers and an accountant reviewed the economics?

A project that cannot answer these is not ready for capital. Our guide to hemp investment red flags covers how to test claims. To source hurd or fiber for a mill trial, search the HempRefinery directory or request a quote.

Frequently asked questions

Is hemp paper better than wood paper?

Hemp bast fiber is long and strong, which suits specialty grades. For ordinary printing and packaging papers, wood is much cheaper at scale, which is why hemp has remained a niche input.

Did USDA say hemp would replace trees for paper?

The 1916 bulletin estimated a strong yield advantage for hemp hurds over pulpwood land, but it also listed serious obstacles in collection, storage, density and cleanliness. It was a research report, not a policy recommendation.

How big is the hemp pulp market?

Reliable current global figures are hard to find from primary sources. A 1994 estimate put it at about 0.05% of world pulp production. Treat large modern market-size claims with caution unless the methodology is published.

Can U.S. growers sell fiber hemp to paper mills?

Possibly, through a processor and usually for specialty or trial use. Most U.S. fiber hemp is sold into other markets, and the national fiber crop is small, according to USDA NASS.

What is the biggest risk in a hemp pulp startup?

Feedstock economics: getting a consistent, clean, year-round supply at a delivered price a mill will pay. Ask for documented mill trials and supply contracts before investing.

This article is for education only and is not investment, legal, or tax advice.

Sources

Credit: the facts, figures and rules in this article come from the organizations and authors listed below. All credit for their research and data belongs to them; follow the links to read the originals.

  1. Dewey and Merrill, U.S. Department of Agriculture, Hemp Hurds as Paper-Making Material, Bulletin No. 404 (1916)
  2. van Roekel, Journal of the International Hemp Association, Hemp Pulp and Paper Production (1994)
  3. USDA Economic Research Service, Industrial Hemp in the United States: Status and Market Potential, AGES-001E (2000)
  4. USDA National Agricultural Statistics Service, National Hemp Report (April 2026)

Figures last checked: November 18, 2026.

🌱 Finished reading? You earned 5 seeds.

Every article you read to the end earns seeds in Hemp Empire, our free hemp farming tycoon game. Play now →

Some links may be affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases.