The New Federal Hemp Definition Explained: P.L. 119-37 and the 2026 Effective Dates

November 18, 2026 · Licensing & Regulation

This guide is for growers, processors, brand owners and buyers who need to know exactly where the federal hemp definition stands right now. It explains what Congress changed in November 2025, which piece took effect on November 12, 2026, which pieces are delayed to December 11, 2026, and which proposals are still only bills. We checked the law text and the Congressional Research Service on November 18, 2026.

Key takeaways
  • Section 781 of Division B of P.L. 119-37, signed November 12, 2025, rewrote the federal definition of hemp. It was written to take effect 365 days later, on November 12, 2026.
  • P.L. 119-103 (H.R. 6500), approved September 2, 2026, says that until December 11, 2026 the new definition applies only to products containing cannabinoids that a cannabis plant cannot naturally produce.
  • So on November 12, 2026 only that one exclusion took effect. The total-THC standard, the ban on cannabinoids synthesized outside the plant, and the 0.4 mg per container cap are set for December 11, 2026.
  • December 11 is also the date the current stopgap funding runs out. Bills for a two-year delay, a repeal and new frameworks are pending. None is law.

The short version

For seven years the 2018 Farm Bill defined hemp as cannabis with no more than 0.3% delta-9 THC on a dry weight basis. That wording let a large market grow in intoxicating products made from hemp: delta-8 THC converted from CBD, THCA flower, and drinks and gummies carrying a meaningful dose of delta-9. Congress closed that gap in the fiscal 2026 agriculture appropriations act, which became Public Law 119-37 on November 12, 2025.

The change was written to start one year later. Then, in September 2026, Congress put most of it on hold for about a month in a continuing resolution. Today, November 18, 2026, the result is a two-stage rollout:

Date Status What applies
November 12, 2025 Enacted P.L. 119-37 signed; Section 781 scheduled to take effect in 365 days
September 2, 2026 Enacted P.L. 119-103 approved; limits Section 781 until December 11, 2026
November 12, 2026 In effect now Products containing cannabinoids not capable of being naturally produced by the plant are no longer hemp
December 11, 2026 Scheduled, unless Congress acts The rest of Section 781: total-THC standard, synthesized-cannabinoid exclusion, intermediate-product limits, 0.4 mg per container cap
Bills (H.R. 7024, H.R. 7010, S. 3686 and others) Pending only Longer delay, repeal or replacement. Not law.

What the new definition says

Section 781 replaces paragraph (1) of section 297A of the Agricultural Marketing Act of 1946 (7 U.S.C. 1639o). Read in the enrolled text on govinfo, it does five main things.

1. A total-THC test for the plant

Hemp becomes Cannabis sativa L. with a “total tetrahydrocannabinols concentration (including tetrahydrocannabinolic acid)” of no more than 0.3% on a dry weight basis. THCA now counts toward the limit, and so do other tetrahydrocannabinols, not only delta-9. That is the end of the legal theory behind high-THCA “hemp” flower.

2. A new “industrial hemp” category

The definition expressly includes industrial hemp: plants grown for stalk and fiber, for whole grain, oil, cake, nut and hull, for microgreens and other edible leaf from immature plants, for university or independent-institute research that stays out of commerce, and for seed to grow any of those. Industrial hemp is carved out of the new “hemp-derived cannabinoid product” definition.

3. Exclusions for products

The term hemp no longer covers:

  • viable seeds from a plant above 0.3% total THC;
  • intermediate or final hemp-derived cannabinoid products containing cannabinoids not capable of being naturally produced by the plant;
  • intermediate or final products containing cannabinoids that the plant can produce but that were synthesized or manufactured outside the plant;
  • intermediate products with more than 0.3% combined total THC and other cannabinoids with similar effects, and intermediate products marketed as a final product or sold directly to consumers;
  • final products with more than 0.4 milligrams combined total THC and similar-effect cannabinoids per container.

4. A definition of “container”

Container means the innermost package in direct contact with the product as sold at retail, such as a jar, bottle, bag, can, carton or cartridge. Bulk shipping containers and outer wrappings are not containers. The cap is per package, not per serving.

5. Homework for FDA

The law told FDA to publish, within 90 days, lists of cannabinoids known to be naturally produced by the plant, THC-class cannabinoids, and other cannabinoids with similar effects, plus more detail on “container.” CRS reported in its October 28, 2026 Legal Sidebar that FDA had not published any of them. That gap matters: the November 12 exclusion turns on which cannabinoids the plant “is capable” of producing, and no official federal list yet answers that question.

The effective-date split

The delay sits in Section 2019 of Division B of the Continuing Appropriations and Extensions Act, 2027 (P.L. 119-103), and it is one sentence long. It says that until December 11, 2026 the Section 781 amendments “shall only apply” to the products described in two clauses of the new definition: (1)(C)(ii)(I) and (1)(C)(iv)(I). Those are the intermediate and final products containing cannabinoids that are not capable of being naturally produced by a cannabis plant.

In effect since November 12, 2026

Products containing cannabinoids the plant cannot naturally produce lost their federal hemp status on November 12. Trade press and law firms commonly name THC-O acetate as an example. Because FDA has not published its list, treat any specific compound list as an interpretation, not an official determination.

Delayed to December 11, 2026

Everything else in Section 781 waits until December 11. That includes the total-THC (THCA-inclusive) plant definition, the exclusion of naturally occurring cannabinoids made outside the plant (the category most observers expect to cover delta-8 converted from CBD), the intermediate-product limits, the viable-seed exclusion and the 0.4 mg per container cap. Section 106 of the same law makes December 11, 2026 the outside date for the stopgap funding itself, so Congress has to pass another funding measure by then. That bill is the most likely place for any further hemp language.

What the delay is not

The delay does not repeal anything, and it does not touch state law. Several states already restrict intoxicating hemp products on their own timelines; see our state hemp laws guide.

What is only pending in Congress

The CRS In Focus report IF13136 (updated September 28, 2026) and Legal Sidebar LSB11496 (October 28, 2026) list a long set of bills. As of November 18, 2026, none has been enacted:

  • Two-year delay: H.R. 7024, H.R. 7010 and S. 3686.
  • Repeal of the Section 781 changes: H.R. 6209.
  • Higher THC limits: S. 2112 (up to 1% delta-9 THC) and H.R. 9830 (up to 1% total THC plus a regulatory framework).
  • Defer to state definitions: S. 4315.
  • Federal product frameworks: H.R. 7212, H.R. 9830, H.R. 10079 and S. 3474.
  • Farm bill: the House-passed H.R. 7567 would move to a total-THC test and require plans to distinguish industrial hemp from cannabinoid hemp.
  • FY2027 agriculture appropriations: the House-passed H.R. 8646 contains no delay.

Treat every item on this list as a proposal. If a funding bill or another vehicle changes the December 11 date, the change will be in enacted text on congress.gov or govinfo, not in a press release.

Where sources disagree

We found three discrepancies worth flagging:

  • Length of the delay. Some law-firm alerts call it a 30-day delay. November 12 to December 11 is 29 days. The statute names the date, not a number of days, so rely on December 11.
  • Bill number versus public law number. Coverage refers to H.R. 6500; CRS refers to P.L. 119-103. They are the same measure: govinfo lists P.L. 119-103 as H.R. 6500, approved September 2, 2026.
  • USDA’s own pages. When we checked on November 18, 2026, the USDA AMS hemp pages were labeled “website updates in progress” and did not yet describe the new definition, and the eCFR text of 7 CFR Part 990 had not been amended. Until AMS issues guidance, expect state programs and USDA rules to lag the statute.

What it means for your operation

Growers

Pre-harvest testing under 7 CFR Part 990 already counts THCA (total THC = delta-9 THC + 0.877 × THCA), so the field test itself changes less than the headlines suggest. The bigger change is downstream: from December 11, harvested floral material and products are judged on total THC at every stage, not only at the pre-harvest sample. Read our THC testing and compliance guide and floral hemp economics before committing 2027 acres.

Processors and brands

The 0.4 mg per container cap is the line that removes most intoxicating finished goods from the federal hemp definition. Products above it would fall outside the hemp exemption and into the Controlled Substances Act framework. See our analysis of the market impact.

Fiber, grain and seed businesses

The new industrial hemp category recognizes these uses by name. It does not by itself change licensing or sampling, which still run through USDA, state and tribal plans. Our hemp license guide covers that process.

Rules change; confirm with your state department of agriculture and USDA AMS before acting.

This article is for education only and is not investment, legal, or tax advice.

Frequently asked questions

Is the new federal hemp definition in effect?

Partly. Since November 12, 2026, products containing cannabinoids the cannabis plant cannot naturally produce are excluded from hemp. The rest of the definition is scheduled for December 11, 2026 under P.L. 119-103.

Is THCA flower still legal federally?

Until December 11, 2026 the statutory definition is still the old delta-9 wording, although USDA pre-harvest tests already count THCA. From December 11, the statute itself counts THCA for all hemp, so flower above 0.3% total THC would not be hemp at any stage. State law may already be stricter.

Did Congress pass the two-year delay?

No. H.R. 7024, H.R. 7010 and S. 3686 were pending when we checked on November 18, 2026. A pending bill does not change the effective date.

Is the 0.4 mg limit per serving or per package?

Per container, meaning the innermost retail package in direct contact with the product. A multi-serving package must total 0.4 mg or less of combined total THC and similar cannabinoids.

Has FDA published the cannabinoid lists?

Not as of CRS’s October 28, 2026 report. The law asked for them within 90 days of enactment. Check FDA’s cannabis pages for updates.

Sources

  1. U.S. GPO govinfo, Public Law 119-37, Division B, Section 781 (2025)
  2. U.S. GPO govinfo, Public Law 119-103, Continuing Appropriations and Extensions Act, 2027, Div. B Sec. 2019 and Sec. 106 (2026)
  3. Congressional Research Service, Legal Sidebar LSB11496 (October 28, 2026)
  4. Congressional Research Service, Changes to the Statutory Definition of Hemp and Implications for Agricultural Policy, IF13136 (updated September 28, 2026)
  5. eCFR, 7 CFR Part 990, Domestic Hemp Production Program (checked November 2026)
  6. USDA AMS, Hemp Production (checked November 18, 2026)
  7. Akerman LLP, Congress Approves One-Month Delay of Federal Hemp THC Restrictions (2026)

Figures last checked: November 18, 2026.

🌱 Finished reading? You earned 5 seeds.

Every article you read to the end earns seeds in Hemp Empire, our free hemp farming tycoon game. Play now →

Some links may be affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases.