Hemp THC Testing and Compliance: Sampling, Total THC, DEA Labs, Remediation and Disposal

November 18, 2026 · Licensing & Regulation

This guide is for licensed hemp growers and the farm managers, consultants and buyers who depend on a clean compliance test. It explains the federal pre-harvest sampling window, how total THC is calculated, what measurement of uncertainty does for you, where the DEA lab requirement stands, and your options when a lot tests hot. It also covers what changes as the new federal hemp definition phases in between November 12 and December 11, 2026.

This article contains affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases, at no cost to you.

Key takeaways
  • A sampling agent must collect samples no more than 30 days before harvest, and you must harvest within 30 days of sampling or resample.
  • Labs report total THC on a dry weight basis: delta-9 THC + (0.877 × THCA). They must also report measurement of uncertainty (MU).
  • A lot passes if the result’s MU range includes 0.3% or less. Up to 1.0% total THC, a hot lot grown with reasonable effort is not a negligent violation.
  • USDA is not enforcing the DEA-registered lab requirement until December 31, 2026. From January 1, 2027 it applies unless USDA extends it again.
  • Non-compliant lots can be remediated and retested, or disposed of. USDA licensees report either one within 30 days.

The compliance timeline

The rules below come from Subpart C of 7 CFR Part 990, which governs USDA licensees. State and tribal plans have to meet the same basic standards but can add requirements or use an approved performance-based sampling method, so check your own program.

Step Federal rule Citation
Pre-harvest sample No more than 30 days before anticipated harvest, by a sampling agent 990.24(a)
No early harvest Crop may not be harvested before samples are taken 990.24(e)
Harvest deadline No later than 30 days after sample collection, or a second sample is required 990.26(a)-(b)
Lot separation Harvested lots may not be commingled 990.26(c)
Retest request Producer may request more pre-harvest testing if results look wrong 990.26(f)
Remediation or disposal report Within 30 days of completing the activity 990.71(b)

How sampling works

Samples come from the flowering tops: the top five to eight inches of the main stem, terminal bud or central cola. The method has to give 95% confidence that no more than 1% of the plants in the lot would exceed the acceptable THC level, and the sample has to represent the lot as a whole. A “lot” is a contiguous area of one variety or strain, which lines up with FSA’s farm, tract, field and subfield terms.

As the producer you must:

  • give the sampling agent complete, unrestricted access during business hours to all plants, growing and storage areas, and every location on the license;
  • have an authorized representative present during sampling if possible;
  • use post-harvest samples only for remediated biomass.

AMS publishes its Sampling Guidelines for Hemp and explains how to become a certified sampling agent. Many state plans train and certify their own agents.

Many growers also run informal tests during the season to track how THC is developing. USDA says informal monitoring tests do not have to be reported. Clean, labeled sample bags and a log of plant location and date make those numbers far more useful.

Sample bags for in-season monitoring

Look for sealable, write-on bags sized for a few ounces of plant material so each monitoring sample stays labeled by lot and date.

Check price on Amazon

As an Amazon Associate, HempDollars earns from qualifying purchases.

Total THC and measurement of uncertainty

The math

Part 990 requires testing by post-decarboxylation or another similarly reliable method. Gas chromatography converts THCA to THC with heat. Liquid chromatography keeps THCA intact, so labs apply a conversion:

Total THC = delta-9 THC + (0.877 × THCA), reported on a dry weight basis.

The 0.877 factor accounts for the mass lost when THCA gives up its carboxyl group. An illustrative example: a sample with 0.05% delta-9 THC and 0.30% THCA has a total THC of 0.05 + 0.263 = 0.313%.

Measurement of uncertainty

Every result must come with the lab’s MU. The rule’s own example: a reported 0.35% with an MU of ±0.06% gives a range of 0.29% to 0.41%. That range includes 0.3% or less, so the lot is within the acceptable hemp THC level. In the illustrative sample above, any MU of at least ±0.013% would bring the low end to 0.3% or below. Before you sign with a lab, ask what its MU is at the 0.3% level.

The 1.0% negligence line

A lot that fails is still non-compliant and must be handled under 990.27. But a producer who made reasonable efforts and whose crop is at or below 1.0% total THC has not committed a negligent violation. Above 1.0%, a negligent violation brings a corrective action plan. Three in five years mean revocation and a five-year ban. See our hemp license guide for the full enforcement ladder.

Labs and the DEA registration rule

Part 990 says that after December 31, 2022, USDA licensees may use only DEA-registered labs for compliance testing. USDA has repeatedly delayed enforcement of that requirement. In its latest notice, dated December 23, 2025, AMS said that because DEA-registered capacity was inadequate, labs without DEA registration could keep testing until December 31, 2026. Labs must meet every other requirement in the meantime.

That leaves about six weeks from the date of this article. Unless AMS announces another extension, your 2027 compliance samples will need a DEA-registered lab. Confirm your lab’s registration status now, and check with your state program, since state plans may set their own lab rules. Labs submit results to USDA through HeMP, and Part 990 also requires them to follow quality assurance, method validation and disposal standards.

Lab results also matter after harvest. Buyers will ask for certificates of analysis, so learn to read them with our guide to vetting suppliers and reading a COA.

When a lot tests hot

Federally, cannabis above the acceptable hemp THC level is marijuana. You must notify USDA (or your state or tribal program) that you intend to remediate or dispose of it, then document what you did.

Remediation

Part 990 allows two approaches:

  • remove and destroy the flower material while keeping stalks, stems, leaves and seeds;
  • shred the entire plant into biomass and retest the shredded material.

Remediated material must be sampled and tested again. Post-harvest sampling is allowed only for this purpose.

Disposal

Disposal must leave the material non-retrievable or non-ingestible. Approved methods include plowing, tilling or disking it into the soil; mulching, composting, chopping or bush-mowing it into green manure; burning; and burying it under soil. You may also use a DEA-registered reverse distributor or law enforcement. AMS’s Remediation and Disposal Guidelines give the detail.

The financial hit is the real risk. Floral and seed crops carry the most value per acre, so a hot test on those lots costs the most. See hemp profit per acre and crop insurance options.

What the new federal definition changes

P.L. 119-37 replaced the statutory hemp definition. On November 12, 2026 only one piece took effect: products containing cannabinoids that the plant cannot naturally produce are no longer hemp. P.L. 119-103 delayed the rest to December 11, 2026. Bills for a further two-year delay (H.R. 7024, H.R. 7010, S. 3686) are pending and are not law as of November 18, 2026.

For field testing, the change is smaller than it sounds. Federal pre-harvest tests already count THCA. The bigger difference comes after harvest. From December 11, the statute itself defines hemp by total THC “including tetrahydrocannabinolic acid,” so harvested flower, biomass and intermediate products are measured the same way at every stage. Two other limits arrive on the same date: intermediate products above 0.3% combined total THC and similar cannabinoids, and final products above 0.4 mg per container, fall outside the definition.

When we checked eCFR in November 2026, the testing provisions of Part 990 had not yet been amended, and the AMS website was marked “updates in progress.” The House-passed farm bill (H.R. 7567) would adjust testing for designated industrial hemp producers, but it remains a bill. Read our explainer on the new definition for the full timeline.

A practical compliance checklist

  1. Choose varieties with a documented record of compliant total-THC results in conditions like yours.
  2. Run informal tests as harvest nears so the official sample holds no surprises.
  3. Schedule the sampling agent so that harvest can realistically finish within 30 days.
  4. Confirm your lab’s DEA registration and MU before the 2027 season.
  5. Keep lots physically separate and labeled from field to storage.
  6. Have a written remediation and disposal plan, including equipment, before harvest.
  7. File disposal or remediation reports within 30 days, and keep records at least three years.

Rules change; confirm with your state department of agriculture and USDA AMS before acting.

Frequently asked questions

How many days before harvest can hemp be sampled?

No more than 30 days before anticipated harvest under 7 CFR 990.24. You then have 30 days from sample collection to finish harvest, or the lot must be sampled again.

What is the formula for total THC?

Total THC = delta-9 THC + (0.877 × THCA), on a dry weight basis. Gas chromatography arrives at the same figure by converting THCA with heat.

Do I still need a DEA-registered lab?

USDA is not enforcing that requirement until December 31, 2026. Plan on using a DEA-registered lab for 2027 unless AMS announces another extension.

Can a hot crop be saved?

Often, yes. You can remove and destroy the flowers and keep the rest of the plant, or shred the whole plant into biomass and retest. Remediated material must pass a new test before it can enter commerce.

Is a hot test a crime?

Not if it is negligent. A negligent violation cannot lead to criminal enforcement under Part 990, and results up to 1.0% total THC with reasonable effort are not a negligent violation at all. Violations with a culpable mental state are referred to law enforcement.

Sources

  1. eCFR, 7 CFR Part 990, sections 990.1, 990.24-990.29 and 990.71 (checked November 2026)
  2. USDA AMS, USDA Extends Enforcement Deadline for Hemp to be Tested by DEA-Registered Laboratories (December 23, 2025)
  3. USDA AMS, Information for Hemp Testing Laboratories (2026)
  4. USDA AMS, Sampling Guidelines for Hemp
  5. USDA AMS, Remediation and Disposal Guidelines for Hemp
  6. U.S. GPO govinfo, Public Law 119-37, Division B, Section 781 (2025)
  7. U.S. GPO govinfo, Public Law 119-103, Division B, Section 2019 (2026)
  8. Congressional Research Service, IF13136 (updated September 28, 2026; congress.gov/crs-product/IF13136)

Figures last checked: November 18, 2026.

🌱 Finished reading? You earned 5 seeds.

Every article you read to the end earns seeds in Hemp Empire, our free hemp farming tycoon game. Play now →

Some links may be affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases.