Hemp in Bioplastics and Composites

November 18, 2026 · Products & Markets

“Hemp plastic” sounds like a single material. It isn’t. Most products sold under that name are composites, where hemp fiber or hurd fills or reinforces a resin that may be petroleum-based or bio-based. This guide is for growers wondering whether composites can take their fiber, founders weighing a product line, and buyers trying to judge supplier claims. It covers how the material works, how hemp compares with glass fiber, the myths to avoid, and how to label biobased content honestly.

This article contains affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases, at no cost to you.

Key takeaways
  • Most “hemp plastic” is a composite: hemp fiber or hurd in a polymer such as polypropylene or PLA. The plastic share is often the larger part.
  • In one peer-reviewed review, hemp fiber is listed at about 1.48 g/cm³ density and 690 MPa tensile strength, compared with about 2.5 g/cm³ and 2,000–3,500 MPa for E-glass.
  • Hemp’s strength is light weight, not raw strength, which is why the main use has been interior and semi-structural parts.
  • Ford’s 1941 “soybean car” is often called a hemp car. The Henry Ford museum says no record of the plastic’s formula exists.
  • Biobased content can be certified through USDA’s BioPreferred program, which measures it by ASTM D6866.

What “hemp plastic” actually means

Three different things get sold under the label:

  1. Natural-fiber composites. Hemp bast fiber is formed into mats or nonwovens, or chopped and compounded with a resin, then molded. The fiber adds stiffness and cuts weight and resin use. The resin may be polypropylene, epoxy, or a bio-based polymer such as PLA.
  2. Filled plastics. Hurd or fine hemp powder is compounded into a plastic as a filler, mainly to replace some resin and change the look. Hemp-filled 3D printing filaments are usually in this group.
  3. Polymers made from hemp biomass. In principle, cellulose or sugars from hemp could feed bio-based polymer production, as corn and sugarcane do today. We found no verifiable evidence of commercial-scale polymer production from hemp in the U.S. Treat such claims with caution until a supplier can show it.

The difference matters commercially. A product that is 30% hemp and 70% polypropylene is a partly bio-based, conventional plastic. That can be a perfectly good product, but it isn’t biodegradable just because it contains hemp.

How hemp fiber performs in composites

A 2021 review in Polymers by Nurazzi and colleagues, on hybrid natural fiber polymer composites, compiles typical single-fiber properties:

Fiber Density (g/cm³) Tensile strength (MPa) Tensile modulus (GPa)
Hemp 1.48 690 70
E-glass 2.5 2,000–3,500 70

These are indicative values. Natural fiber properties vary with variety, retting, processing and test method, and other studies report different numbers. The pattern is consistent, though. Hemp is much less strong than glass fiber but can be comparably stiff at roughly 40% lower density. That’s why natural fibers suit stiffness-limited, weight-sensitive parts rather than high-strength structures.

The practical challenges are well known in composites work. Natural fibers absorb moisture, bond less readily to hydrophobic resins without treatment, and vary from batch to batch. Composite makers manage these with fiber treatment, coupling agents and tight incoming specifications. For growers, that means quality control matters as much as tonnage.

Where hemp composites are used

Automotive

The Polymers review describes natural fiber composites as cost-effective for automobile body panels and interiors. It suggests hybrid composites may eventually replace glass-fiber composites in some structural parts such as bumper beams. In the U.S., Oak Ridge National Laboratory reported in November 2024 that Hempitecture received about $8.4 million in U.S. Department of Energy funding for a plant in Rogersville, Tennessee. The CEO said the plan was to supply American automakers with natural fiber nonwovens. That’s a stated plan, not a confirmed supply contract.

Consumer products and 3D printing

Hemp-filled PLA filaments and molded consumer goods (cases, containers, tool handles) are the visible face of hemp plastic. Volumes are small, and the hemp share is often a minority of the material, so check the spec sheet.

Construction-adjacent

Engineered hemp boards and nonwoven mats overlap with building materials. See hemp building materials beyond hempcrete.

Hemp-filled 3D printer filament

Check the stated hemp content, the base polymer (usually PLA), recommended print temperature and nozzle size, since fiber-filled filaments can wear or clog small nozzles.

Check price on Amazon

As an Amazon Associate, HempDollars earns from qualifying purchases.

Myths to drop from your pitch deck

“Henry Ford built a hemp car”

Ford’s 1941 experimental “soybean car” is often described online as made of hemp. The Henry Ford museum says that “the exact ingredients of the plastic panels are unknown,” because no record of the formula exists. The museum notes that one article claimed a formula that included soybeans, wheat, hemp, flax and ramie, but it doesn’t confirm that. The honest version is that hemp may or may not have been an ingredient. Nobody can document it.

“Hemp plastic is biodegradable”

That’s only true if the resin is biodegradable, and even then usually only under specific conditions, such as industrial composting for PLA. Hemp fiber in polypropylene isn’t biodegradable.

Market-size headlines

Market-size figures for “hemp bioplastics” come almost entirely from paid research firms that don’t publish their methods. We found no government or peer-reviewed estimate of the U.S. hemp composites market. If you cite a vendor figure, label it as a vendor estimate.

Labeling and biobased claims

USDA’s BioPreferred program, created by the 2002 Farm Bill and reauthorized in the 2018 Farm Bill, has two parts. One is a federal purchasing preference for designated product categories. The other is a voluntary “USDA Certified Biobased Product” label. Biobased content is measured by ASTM D6866 during certification. USDA defines biobased products as made from plants and other renewable agricultural, marine and forestry materials, excluding food, feed and fuel. USDA’s pages don’t name hemp specifically. A hemp composite qualifies, or doesn’t, on its measured content like any other product.

For marketing, the safe practice is to state composition by weight (“contains 30% hemp fiber”). Use a certified biobased percentage if you have one. Avoid broad terms like “eco-friendly” or “plastic-free” unless you can substantiate them. The FTC’s Green Guides apply to environmental claims.

What buyers need from the supply chain

Composite makers buy specifications, not acres. Typical requirements include fiber length, cleanliness (low hurd and dust content), moisture, consistent retting, and reliable year-round volume. U.S. hemp fiber sold for an average $0.21 per pound in 2025, according to USDA NASS. The 21,693 harvested acres produced 67.3 million pounds. That’s cheap raw material, but the value is created in decortication, refining and nonwoven or compounding steps.

This article is for education only and is not investment, legal, or tax advice.

Frequently asked questions

Is hemp plastic 100% hemp?

Almost never. Most hemp plastics are composites of hemp fiber or hurd in a resin, and the resin is often the majority of the material.

Is hemp fiber as strong as fiberglass?

No. A 2021 Polymers review lists hemp at about 690 MPa tensile strength versus 2,000–3,500 MPa for E-glass. Hemp’s stiffness for its weight is its advantage.

Was Henry Ford’s 1941 car made of hemp?

It can’t be shown. The Henry Ford museum says no record of the plastic’s formula exists.

Can a hemp composite carry the USDA biobased label?

It can be certified under USDA BioPreferred if its biobased content, measured by ASTM D6866, meets the program’s requirements.

Is there a big U.S. market for hemp fiber in plastics today?

We found no official measure. Announced projects such as DOE-funded nonwoven plants point to growth, but buyers and volumes are still being established.

Sources

  1. Nurazzi, N.M., et al., A Review on Mechanical Performance of Hybrid Natural Fiber Polymer Composites for Structural Applications, Polymers (2021)
  2. The Henry Ford, Soybean Car
  3. Oak Ridge National Laboratory, Hempitecture receives $8.4 million DOE funding (2024)
  4. USDA BioPreferred Program, About BioPreferred
  5. USDA BioPreferred Program, Biobased Products
  6. USDA NASS, National Hemp Report (2026)

Figures last checked: November 18, 2026.

🌱 Finished reading? You earned 5 seeds.

Every article you read to the end earns seeds in Hemp Empire, our free hemp farming tycoon game. Play now →

Some links may be affiliate links. As an Amazon Associate, HempDollars earns from qualifying purchases.